dental ceramics
英 [ˈdentl sɪˈræmɪks]
美 [ˈdentl səˈræmɪks]
网络 牙科陶瓷
双语例句
- This article presents a review on the resin bond to dental ceramics.
对牙科陶瓷树脂粘接系统的研究进展进行了概述。 - Abrasive characteristics of several CAD/ CAM dental ceramics
几种CAD/CAM齿科全瓷修复陶瓷的磨粒磨损特性 - Domestic Clinical Application and Research Development of Dental Machinable Ceramics Materials
牙科可切削陶瓷材料国内临床应用及研究进展 - Reactive Fabrication and Mechanical Properties of Dental Machinable Ceramics
牙科ZTA/BN可加工陶瓷的反应制备及力学性能 - Effects of Surface Treatments on Microstructural and Crystallographic changes of Dental 3Y-TZP Ceramics
表面处理方法对牙科氧化锆陶瓷表面相结构及微观结构影响 - Effects of Low-Temperature Aging on Mechanical Properties of Two Kinds of Dental Zirconia Ceramics
低温时效对两种牙科氧化锆陶瓷力学性能的影响 - Research of Dental Ceramics for Crown and Bridge Restoration
陶瓷冠桥修复材料的研究进展 - Preparation of Nanometer Powders of Dental Alumina Ceramics
牙科纳米氧化铝陶瓷粉体的制备 - Objective To find out how to prepare high-density dental ceramics through isostatic pressing so that sintering shrinkage will be reduced.
目的利用等静压技术制备高密度坯体，减少牙科陶瓷烧结时的尺寸收缩。 - ? Objective: To study the preparation method of nanometer powder of zirconia, which was used to toughen dental alumina ceramics.
目的：探讨用于增韧牙科氧化铝陶瓷的纳米氧化锆陶瓷粉体的制备方法。 - Primary Study On Fabrication Of High Performance Dental ZrO_2 Ceramics Restoration. Using mathematical method to estimate the maximum deficiency dimension within permission of dental prosthesis.
制备高性能氧化锆陶瓷牙科修复体的初步研究运用数学方法对牙科修复体的最大容许缺陷进行估算。 - Current development of dental ceramics for crown and bridge restorations
牙科陶瓷冠桥修复体材料的发展现状 - Study of measuring the elastic modulus of dental ceramics using digital image correlation method
数字图像相关法测量牙科陶瓷材料弹性模量 - Research on dental ceramics by Spark Plasma Sintering
放电等离子烧结法制备牙科陶瓷的研究 - Conclusion: GI-ⅱ Infiltrated Ceramic is lower in fracture toughness and hardness than In-ceram, but much higher than many other traditional dental restorative ceramics and its higher Weibull modulus indicate better homogeneity.
结论：GI-Ⅱ型渗透陶瓷的断裂韧性和硬度比In-ceram低，但明显高于其它传统牙科陶瓷，而且其较高的Weibull模数表明其较好的材料均质性。 - The Study of Translucency of Natural Human Tooth and Dental Ceramics
天然牙和牙科陶瓷半透性的研究 - Conclusions The component of K 2O has a great effect on the microstructure and the properties of the leucite microcrystal reinforced dental glass ceramics and the content of leucite microcrystals has a notable influence on the compressive strength of the dental glass ceramics.
结论K2O在原材料中的配比对白榴石微晶化及其增强的牙科玻璃陶瓷的显微结构和相关性能有较大影响。白榴石微晶含量对该玻璃陶瓷的抗压强度有明显影响。 - Biological Performance of Four Dental Ceramics Modified by Cold Plasma
等离子体改性的4种口腔陶瓷的生物学性能研究 - Conclusion: Alumina glass composite is a new promising ceramics for fabricated dental crowns and bridges, because their strength and fracture toughness are 2~ 3 times stronger than those of current dental ceramics.
结论：由于氧化铝玻璃复合体的强度和断裂韧性是目前牙科瓷的两到三倍，因而，它是一种极有前途的、制作牙科冠桥的新型陶瓷材料。 - Study on K_2O-Al_2O_3-SiO_2 System Dental Glass Ceramics and Clinical Application
K2O-Al2O3-SiO2系统牙科玻璃陶瓷的研制及其临床应用 - Preparing of Al_2O3_/ ZrO_2 Composite Dental Ceramics through Isostatic Pressing Technology
利用等静压技术制备牙科Al2O3/ZrO2陶瓷材料 - Study on the Leucite Reinforced Dental Glass Ceramics
白榴石增强的牙科玻璃陶瓷的研究 - The results show that the formation of bone-like apatite on dental ceramics modified by cold plasma is easier than that of no modification and the growth of osteoblast can be promoted.
结果发现：与活化改性前相比较，等离子体活化改性后的口腔陶瓷材料更有利于类骨磷灰石的形成，并能促进成骨细胞的增殖。 - Dental ceramics become gradually the important materials for dental crown and bridge prostheses because their high chemical stability and good biocompatibility, wear resisting, smooth and nonporous surface, lifelike color and lustre, no ageing and no coloring, etc.
牙科陶瓷材料以其良好的化学稳定性、生物相容性、耐磨损、表面光洁、色泽逼真、不老化和不着色而成为牙科冠桥修复的重要材料。 - Objective To research the influence of K 2O composition in the raw material on leucite microcrystallization and to study the effect of leucite content on compressive strength of the dental glass ceramics reinforced by leucite microcrystallization.
目的探讨K2O（氧化钾）在白榴石微晶化增强牙科玻璃陶瓷的原材料组分与比例方面的规律以及白榴石微晶含量对该玻璃陶瓷抗压强度的影响。 - Development of the resin bond to dental ceramics
牙科陶瓷树脂粘接研究进展 - So it is necessary for us to measure and analysis the translucency of natural tooth and relationship between translucency of tooth and dental ceramics.
因此，对天然牙半透性的分析和测量以及了解天然牙与牙科陶瓷半透性的关系是十分必要的。 - In order to imitate natural tooth, dental ceramics should have similar translucency besides the color space.
模拟天然牙的牙科陶瓷，除了颜色的匹配外，还要有与牙体组织相近的半透性。 - As an example, three mechanical parameters of dental ceramics were selected to be the alternatives for machinability evaluation. Machinability of several typical dental ceramics was evaluated, and ceramic materials were ranked in order of comprehensive evaluation index.
本文选择三个力学性能参数构成因素集，根据提出的评判方法，对几种典型齿科陶瓷材料的可加工性进行评价，并根据综合评价指标进行排序。